Welcome to Neon Brothers Sign

Thank you for choosing Neon Brothers! Our neon signs are designed to add vibrant light and personality to any space. This guide will walk you through the easy setup process so you can start enjoying your new sign right away.

---

1. Unboxing Your Neon Brothers Sign

What’s in the Box:

• Neon Sign
• Power Adapter
• Remote Control (if applicable)
• Mounting Accessories (e.g., screws, wall plugs, hanging chain)
• User Manual

Safety Precautions:

• Check that the power supply of the circuit also meets the required specifications.
• Do not expose the sign to water or any wet conditions as it may bring some adverse effect on the sign.
• Do not touch the sign with wet hands or place on the area that is exposed to high humidity.

---

2. Getting Started

Step 1: Powering On

• Plug one end of the power adapter to the input socket of your Neon Brothers sign.
• Insert the adapter into a normal electric outlet at the wall.
• If a switch is provided on the cord and the remote control, use any of both to switch on the sign.

Step 2: Adjusting Brightness & Modes (Optional)

• Use the remote control to adjust brightness levels.
• Switch between lighting modes (steady, flashing, etc.) using the mode buttons on the remote.

---

3. Mounting Your Neon Sign

Wall Mounting:

• Step 1: Choose the location where you want to hang your sign.
• Step 2: Mark the spots for drilling based on the mounting holes on the sign.
• Step 3: Drill the holes and insert the wall plugs.
• Step 4: Use screws to securely attach the sign to the wall.

Hanging with a Chain:

• Step 1: Attach the provided chain to the mounting points on the sign.
• Step 2: Hang the sign from a secure hook or fixture.

---

4. Troubleshooting

Sign Doesn’t Turn On:

• Check the power connection and ensure the adapter is properly plugged in.
• Try a different outlet to rule out power supply issues.

Remote Control Not Working:

• Ensure the remote has batteries installed and they are functioning.
• Point the remote directly at the sign, within range.

Sign Flickering or Dimming:

• Check the power supply and ensure the voltage is stable.
• Try reducing the brightness or switching modes to see if the issue persists.

---

5. Care & Maintenance

• Clean your neon sign with a soft, dry cloth. Avoid using water or cleaning solutions.
• Keep the sign in a dry area to prolong its life and prevent electrical issues.
• Unplug the sign when not in use for extended periods.